View Products & Services on Display at MD&M West 2008

Assembly Manufacturing

Alcatel Vacuum Products Inc.

Booth 1384

Adixen, H2000 Plus Hydrogen Leak Detector, and H2000 leak detector, by Alcatel Vacuum Products, use a safe hydrogen mixture as a trace gas. Sensitive to hydrogen and used to detect leaks that are smaller than bacteria. Using Non-hazardous 5 percent hydrogen in a 95 percent nitrogen mixture, it measures and pinpoints minute leaks independent of part temperature or volume. Maintenance-free as no vacuum pumps or valves are required. Dynamic background compensation minimizes potential problems with background interference assisted by the fact that hydrogen gas dissipates quicker than other gases. It features a standard probe with no sample suction.

Booth 807

AOK Tooling Ltd. manufactures plastic injection molds, die-cast, stamping tools and plastic injection molding. They also manufacture and assemble medical parts in 10K standard cleanroom. The products they produced are repiratory mask assembly and medical parts injection molding. Beside medical industry, AOK Tooling also manufacture and sub-assembly products for automotive, electronics and irrigation.

Booth 807

AOK Tooling Ltd. is a precision mold manufacturing, plastic injection molding, metal stamping, product engineering design & product assembly company. AOK Tooling Ltd. established in year 1999. Main products are medical, irrigation, electronics, automobile part mold manufacturing, plastic molding & sub-assembly. The company has about 350 employees with 150 mold makers, 35 mold design engineers. ISO9001-2000 certified company. AOK Tooling has 10K standard cleanroom to manufacture and assemble medical products. The company is one stop solutions product provider company.

Booth 1857

Apple Rubber offers a full line of ISO 9001-2000 certified rubber parts and sealing solutions for industry with USP Class 6 grades available. In addition to silicone, Apple Rubber now offers medical-grade elastomers such as Viton® fluorocarbon (FKM) and EPDM rubber for medical applications. Complete engineering support, manufacturing, quality assurance and a Class 10,000 ISO Class 7 certified cleanroom are also available.

Booth 1434

Bird Precision continues to make it easier to put orifices and filters where you need them. A number of new Swagelok, Parker, SMC, and value plastic type Retrofits are now available. A number of new .0001"super tolerance ruby orifices that can lock in very repeatable flow values, for the most demanding applications have been introduced. Unique micro micron series of ruby orifices from .0004"is available. These products are used in a number of medical gas applications that require precise flow and long life without wear, corrosion or outgas.

Booth 2439

New Radiance™ 3G Laser IRAM systems: designed to provide the ultimate in high-quality, particulate-free welding, ideal for medical device manufacturing. Feature closed loop control with digital signal processor; modular/scalable architecture; CANopen control system; distributed microprocessor design; multiple wavelengths available; Smart Tool technology with tool maps; discrete I/O available for custom systems.
Also Branson 2000X Ultrasonic totally digital systems with increased power levels (400-4000 W), all-digital power supply module, precision components. Closed-loop amplitude control, real-time graphing, primary/secondary control modes, horn “signature” compare. Communications: Ethernet, remote setup/diagnostics, X-net software. USB port. Onboard single board computer. Full VGA color touchscreen, multiple languages.

Booth 607

Brivant Ltd. has developed a guidewire for highly stenosed lesions. The new range is offered by Brivant as part of their extensive OEM range.

It is a natural progression from Olympian OEM steerable guidewire. Rrange used in coronary and peripheral interventions. Customers can be supplied bulk non sterile or have the Olympian Plus guidewires supplied packaged, sterile and labeled.

The Olympian Plus guidewire is available in 3, 4.5, 6, 9 and 12 gram force. Key to its design is the one-piece core construction which removes abrupt transitions and ensures torque is transmitted along a central axis.

Booth 2840

Sony TechnoLOOK 2008 New Video microscope systems model TW-TL1Z/10Z/15Z with zoom range 4.3x-43x/12x-120x/21x-211x integrated with super HAD CCD video camera and 10.4” LCD monitor display perfect for any medical device, SMT application. The new model is self contained unit directly save image to compact flash and provided with White Power LED light for natural color viewing. The price ranges around $6,500~$8,500.

Booth 607

Contech Ireland is an OEM Sub-Contract Manufacturer servicing the World Wide Medical Device Industry with Cardiovascular Dispensing Systems and Accessories, Protective Sheaths, Balloon Refold Devices, Guidewire & Catheter Packaging, Accessory Pouches and Blister Packaging. Contech Ireland provides support structures such as NPI, Rapid Prototyping, Injection Moulding, Extrusion, and Contract Sterilization. Contech Ireland has implemented several cost reduction strategies such as Lean Manufacturing, Six Sigma, Vision System and Electronic Invoicing.

Web: http://www.cacglobal.com

Booth 966

Control & Automation Companies’ thermal shrinking / laminating removal machine model CAC-SHTR-01 is designed to facilitate the removal of the thermal shrink tubing used during the catheter lamination process. This semiautomatic equipment uses and proprietary precise cutting system that applies a precise and controlled cut over thermal shrinking material that covers the full length of a catheter providing and easy and consistent thermal shrink tubing removal.

The equipment help to overcome the problems associated with associated with the manual thermal shrinking removal associated with the manual fixtures.

Web: http://www.cacglobal.com

Booth 966

Control & Automation Companies’ Thermal Shrinking / Laminating machine is designed to apply a precise amount of heat to a wide variety of tubing used in the manufacturing of medical device catheters, and other braided tubing.

Thermal Shrinking / Laminating machine, Model CAC-RF-003 is a programmable logic controlled system that uses innovative heating die technology to control up to 4 different temperatures in the heating die to apply precise heat (ambient to 800ºF) for the full the length of a catheter providing consistent lamination.

Booth 2355

Doyen Medipharm's packaging machines are specifically designed for packaging, wound care dressings, diagnostic devices, drapes, catheters/guidewires, transdermal patches, orally dissolvable films and transmucosals, surgical gloves, sutures and electrodes.

Thermoforming machines use for packaging syringes, sutures, high profile packs and procedure packs.

Four-side seal rotary and continuous-motion platen sealing systems use for wound care dressings, cosmetic pads, adhesive strips, island dressings, hydrogel dressings and catheters.

Transdermal fabricating and packaging machine applications include monolith transdermal patches, reservoir transdermal patches and iontopheretic devices.

Web: http://www.dukcorp.com/us

Booth 2331

Dukane introduces new Dual Servo Spin welders. The Dual Servo Spin welder is designed for welding circular parts that have a tight tolerance requirement for both the orientation between the parts being welded and the overall final welded assembly height.

The new design builds on the solid foundation of Dukane’s existing single servo-spin welder, by replacing the pneumatic Z-axis drive with a second servomotor. The unit’s control system provides the ability to hold orientation tolerances of +/- 0.1 degree of rotation and Z-axis tolerances of 10 microns. In addition, the control system coordinates the performance of both servomotors thereby providing the user with a new welding mode Dukane calls “constant torque”.

Web: http://www.efd-inc.com

Booth 3228

EFD’s new 787MS-SS valve features an innovative low-volume low-pressure design that uses a small gauge (0.013 inches - 0.004 inches ID) disposable dispensing tip in place of a standard spray nozzle to produce uniform spray patterns between 0.0625” and 0.75” in diameter. Benefits include greater process control, faster throughput, fewer rejects, and lower production costs.

Booth 1976

Eraser’s fully automated Model WC601D Rotary Blade Tubing Cutter is perfect for processing flexible tubing to very tight specifications such as those required for medical applications. Model WC601D is capable of processing materials such as flexible polyurethane, flexible PVC, nylon reinforced hose and rubber hose to the programmed length and number of pieces. The belt feed and rotary cutter ensure there is no crushing of material, either along its length or on the cut ends. Kitting and batching capabilities.

Booth 964

FasTest Inc. offers test connectors for ultra thin hypodermic and catheter tubing. The company has a smallest connector available for medical device leak test applications. Previously available for outside diameters down to 0.030”, FasTest’s new ME001 style connector is quickly connected to diameters down to 0.015”.

Capable of sealing down to 0.015" OD, the ME001 connector is designed for leak testing infusion set and drug delivery devices. The compact 0.84" OD easily mounts in limited space locations and the pneumatic actuation is ideal for soft touch control of delicate components or automation for ergonomics or high production testing.

Booth 729

GPS China, an Irish owned outsourcing and manufacturing company has been in operation for over 20 years and in this time has developed long-term partnerships with some of the worlds leading medical device companies.

GPS China specializes in the design, development, manufacture and assembly of plastic medical devices and pharma packaging. The company is equipped with class 100k cleanrooms, ISO13485 certified, FDA registered and have extensive expertise in an array of technologies including extrusion, injection moulding and sterilisation. GPS China customers benefit from an integrated range of services, established logistic network and a single point of contact for their entire supply chain requirements.

Booth 472

FC7000Mk2-60 is a 24” wide cutting plotter by Graphtec America, Inc. for inexpensive, desktop prototyping of laminated micro fluidic devices. The plotter has an adjustable down-force of 20g to 600g and cutting speed up to 1485mm/sec. The plotters can cut micro-features in a variety of films with 10ìm resolution. Devices are completed within minutes without a clean room, photolithographic processes or chemicals.

Booth 1379

Hotwatt, established in 1952, began with the manufacturing of one product, the open coil heating element. Since then Hotwatt has expanded product line to include cartridge, air process, immersion, strip and finned strip, tubular and finned tubular, band, foil, flexible glasrope and ceramic heaters.

The company is dedicated to the design and manufacturing of resistance heating elements for a variety of OEM and industrial applications. In addition, they can supply compatible accessory items which enable the company to offer a complete heater system.

Booth 1388

Hsiner Co. Ltd. manufactures CPAP full face mask series. The company can make one peice molded silicone. Their products are ergonomic, comfortable, and affordable.

Booth 3055

MACtac® Medical, a leader in the design and manufacture of skin-friendly pressure sensitive coated materials for the medical device industry, recently made a significant investment to further its capabilities with the addition of a new state-of-the-art coater. This addition gives MACtac Medical the opportunity to lead the medical pressure-sensitive adhesive (PSA) industry through technology and process innovation, resulting in better product performance, greater design flexibility, controlled quality, shortened lead-times, and cost-effective, efficient PSA production.

MACtac Medical products and systems are found in various applications, including single-use electrodes, surgical drapes, wound dressings and transdermal drug delivery systems. All products are manufactured in ISO or current Good Manufacturing Practices (cGMP) compliant facilities to ensure product quality and patient comfort.

Booth 3031

MicroLumen, Inc. provides high performance medical tubing. The company’s polyimide tubing is a thermoset plastic providing excellent mechanical, thermal and chemical properties and is manufactured with extremely tight tolerances. Standard ID ranges of 0.004" to 0.086" with thin profiles. Polyimide tubing is ideal for catheter shafts and low-invasive medical devices; Cardiovascular, Neurological, Urological applications. Braid & Coil reinforced designs available for added torque and column strength. PTFE liners, flexible tips, embedded marker bands, multi-durometer constructions and custom laser-machining are available. They offer innovation solutions and improve catheter systems by adding value. ISO 9001:2000 and USP Class VI Biocompatible.

Booth 3031

MicroLumen Inc. provides high performance medical tubing ideal for critical applications and low-invasive medical devices. Typical applications include cardiovascular & urological catheters, stent deployment and drug delivery systems. The company primary product line is Polyimide; which has excellent mechanical, thermal & chemical properties. Braid reinforced designs are available for added flexibility, torque & column strength. MicroLumen offers value-added solutions: Thermoplastic jackets, multi-durometer designs, flexible tips, sub-assembly, PTFE liners & laser machining. USP Class VI biocompatible tubing & ISO 9001:2000.

Booth 3027

Minitubes specializes in precision metal tubing and tubular components. More than 100 alloys available, including stainless steels for surgical implants, nickel titanium, tantalum and precious alloys. Thin walls, minute tolerances and smooth finishes are specialties. Products used in stents, endoscopes, diagnostic probes, surgical instruments…Prototyping and supply of complete assemblies.

MeKo is a contract manufacturer specialized in laser material processing and micromachining (ISO 9001:2003 standard). The company offers welding, cutting, drilling, and post processing services. MeKo is one of the world leaders in manufacturing components for the medical device industry with most profound experience in cutting surgical instruments and stents.

Booth 2445

NeedleTech Products, Inc. is introducing BONUS™ NEEDLES. The company’s BONUS™ needle program is primarily a Bone Needle that can be used for Bone Marrow Biopsy, Bone Marrow Aspiration or Vertebroplasty. The advantage or BONUS™ of this needle is that the handle can be easily removed and replaced as needed. This feature allows for better visibility during Vertebroplasty and subsequent cement delivery. The second BONUS™ feature this product offers is the ability to receive multiple cannula with a single handle.

Booth 408

Nestronics offers high-end, integrated Electronics Manufacturing Services (EMS) and solutions to Original Equipment Manufacturers (OEMs). It specializes in end-to-end manufacturing solutions such as new product introduction, test development, manufacturing, and specialized after-sales services.

Key industries that it services include the telecommunications & instrumentation, medical & bioscience, avionics/oil & gas sectors, as well as other industrial product segments. Nestronics is also recognized for its radio frequency manufacturing capabilities applied in the areas of RF transmission equipments and systems. With a proven track record and a wealth of invaluable expertise, Nestronics offers its customers value through cost-effective, high variation, medium volume manufacturing solutions. The quality and environmental management certifications we have achieved include ISO9001:2000, AS9100:2004, ISO14001:2004 and ISO13485:2003.

Booth 2843

O.R. Lasertechnology Inc. is a manufacture of laser welding systems since 1997, the company offers job shop services in Illinois and throughout the Midwest USA, please contact them for more info.

Products and Services: Nd:YAG Lasers from 50 watts to 200 watts, Stationary systems as well as fully mobile, customazation, automtion and semi-automation, Class IV and Class I, precision laser welding with minimal heat affected zones which result in less finishing work less heat treating, and minimal distortion to base materials.

Web: http://www.osgtool.com

Booth 649

OSG Tap & Die Inc.'s EXOCARB AERO-SUS is a best-suited tool for milling exotics. Specifically Titanium 6Al4V, 303 and 304L stainless, Cobalt-Chrome, and Stellite. The EXOCARB AERO-SUS has many features including; anti-vibration flute design to improve surface finish, optimum metal removal rate for deeper depths of cuts and faster feed rates, maximum rigidity, and TiAIN, corner radii, and eccentric relief to extend life of the tool.

Booth 1608

Pad Print Machinery of Vermont’s high-speed brushless servo-motor driven XE-07 and its pneumatic pad-drive counterpart – the XP-07 for automated, in-line printing features a horizontal pad stroke adjustable between 45 and 90 degrees, or beyond by special order.
The XE/XP-07 accepts a 60mm, 90mm, 130mm or 160mm sealed inkcup for a 50mm to 150mm diameter image. The pad stroke is variable to 8 inches. The XE-07 can run 2,500 cycles per hour; the XP-07 1,000cph. The XE/XP-07 comes standard as a one-color single pad machine, can be modified for up to four colors, or have four pads printing a single color.

Booth 644

Innovative Digital Phase Technology from PhaseView is the easiest way for qualitative and quantitative 3D imaging.

MicroPhase is an affordable tool offering unique benefits: Optical Microscope Images; 3D Surface Topography; Simple Add-On compatible with any microscope; No additional accessories needed; Fast acquisition & processing time, less than 10 s; Accurate measurements in nanometer range; and Certified measurement device.

By replacing complex equipment for 3D visualization and measurement, GetPhase performs 3D reconstruction in a remarkably fast and easy way from a set of 2D intensity images. GetPhase provides comprehensive tools from automatic acquisition and processing to 3D analysis and reports

Booth 2486

Plastic & Metal Center introduces expansion of its Thermo Vacuum Formed Packaging line as well as expansion of its CNC machining centers to a new building. PMC has also expanded its injection molding capabilities with new Overmolding machine. These expansions help PMC to become a one-stop shop for all metal and plastic parts from rapid prototyping to machining to production metal parts and molded parts. PMC can design and produce thermo formed trays within weeks and specializes on low volume and prototyping.

Booth 1087

Precision Medical Plastics, Ltd. is a ISO 13485:2003 certified contract manufacturer specializing producing precision thermoplastic tubing, catheters and providing component assembly services for the medical industry. The company capabilities include: wire or monofilaments braided tubing, multi-lumen tubing, thin wall tubing, co-extrusion tubing, microbore tubing, radiopaque tubing, hole punching, printing, tip forming, OEM assemblies. The company supplies high pressure braided tubing (1200PSI), Angiographic tubing, PICC tubing, sheath tubing, Dilator, Epidural catheter, CVC tubing, Pig tail catheter, drainage catheter and so on.

Booth 3037

Production Basics provides a free, interactive 3-D configurator to help visualize ideal workbench for medical manufacturing. Choose sizes, accessories and colors from three product lines, then print configuration or request a quote through the company web site.

Booth 412

Racer Technology specializes in engineering and medical grade devices. A one-stop contract manufacturer providing customized product design, prototyping, plastics injection molding, tooling fabrication, metal stamping, plating and precision machining to customers with manufacturing throughout Asia and sales support in USA. The company is headquartered in Singapore, with facilities in China (Suzhou), Indonesia (Batam) & Malaysia (Senai).

The company has their own in-house tool making and design section, with expertise in 3D mold design and prototyping capability, and communicate design flaws back to customers which improves manufacturing quality.

Capabilities include:
• Mechanical Consultant
• Mechanical Design
• Prototyping
• Tooling Fabrication
• Plastics Injection Molding
• Plastics Injection Insert Molding
• Metal Stamping
• Machining
• Box Build.

Booth 1883

The Remstar Shuttle® VLM, an enclosed system of vertical trays, extraction platform and computerized controls, allows operators to stay in place as small parts, tools, dies, and other items are delivered to an ergonomic workstation. Remstar’s horizontal carousel is a system of horizontally rotating shelves delivering requested items quickly and safely. Remstar’s automated storage systems are designed to increase order-picking productivity up to 600% over traditional methods, maximize productivity by 2/3 and reduce floor space requirements up to 75% in medical device manufacturing.

Booth 1525

Rinco Ultrasonics will be demonstrating the dynamic 745 35kHz press system along with ACU Capture software. The ACU Capture software allows the user to capture weld data after each cycle. Allows for plotting of force, power and travel over time. Data collected can be exported to Word, Excel. Standard is Access with over 50 weld parameters captured. ACU Capture is Windows based and can be connect via laptop computer over a serial connection or to customers corporate network via Ethernet. Rinco's Dynamic 745 welding system is perfect for the medical industry.

Booth 381

RMI Laser LLC’s marking systems are the ideal solution for precision marking and labeling a variety of manufactured parts. With the ability to quickly and easily mark text, UIDs, barcodes, 2D codes, images, logos, photos and other complex marking instructions. Impact Free Marking: laser light heat is nominal and very delicate parts can easily be marked without risk of damage. Sterility: unlike other marking methods, laser marking requires no physical contact with the marked object and does not add inks, dyes or contaminants to the part.

Booth 381

The name RMI is synonymous with state-of-the-art coatings and the company offers the most extensive ultraviolet through far infrared coating capabilities in the optics industry. Part of RMI’s coating success is largely due to the company’s long-time technical expertise in a variety of deposition processes: electron beam evaporation, thermal evaporation, ion-beam sputtering and magnetron sputtering. However challenging you coating requirements may be - standard or custom, low or high power, any wavelength from UV through FIR - Rocky Mountain Instrument coatings are guaranteed to meet or exceed your expectations, providing exceptional quality and optimum performance.

Booth 381

Rocky Mountain Instrument has invested enormous time and effort to establish complete in-house assembly and testing abilities. By not relying on outside sources, the company can more effectively serve our customers through better quality and cost controls and by ensuring timely delivery. RMI assembly personnel have the most diverse experience in the industry. Working closely with you, RMI engineers develop the fastest and most efficient ways to assemble and test your design. Call 303 664 5000 or look at http://RMIco.com for more information.

Booth 2809

The UW050 Laser Fusing Workstation offered by ROFIN is a desktop solution designed for the fusing of polymer materials such as balloon catheters, leads, and other tubular products and components.

Dependent upon the part’s material composition, the system can be integrated with CO2, Diode, or Fiber laser technologies. Part loading is done from the top rather than the traditional method of side loading through the rotary. The unique tooling allows for complete part rotation to provide a 360º circumferential weld. The timesaving, loading feature reduces the risk of damage to the work piece and makes part handling an easier task.

Booth 1571

Sanbor Medical is a U.S. contract manufacturer with a high quality and low cost production facility in China, providing off shore pricing with on shore reliability. The company provides services of Class I & II devices, and produces box builds, medical instrumentation, and single use device assemblies, along with packaging in Class 100,000 cleanroom and sterilization through FDA registered partners. In addition to finished devices, the company offers PCB assemblies, electro-mechanical sub-assemblies, and plastic molded components. The company is FDA registered, ISO13485, ISO9001 certified and UL/CSA registered.

Booth 2074

From concept to production, Schnipke Engraving Co. offers various injection molding services featuring micro molding technology for miniature medical devices and implants. The company's technology and experience consistently result in excellent quality and cost-savings. Supporting capabilities include high-volume automation, continuous reel insert molding, and over molding. Schnipke Engraving is a peace-of-mind resource to the medical device industry.

Booth 229

The SkyeModule M4 is a feature-rich, easy-to-use HF RFID reader module specially designed to serve three distinct market applications: product authentication, access control and contactless payment.

The SkyeModule M4 provides industry-leading security and sophisticated features normally associated with much more expensive readers at a ground-breaking price. Its small size and intelligent software ease integration and provide customers with a significant cost-performance advantage.

• Open architecture; forward compatible and highly scalable
• Supports more ISO15693 and 14443 A/B tags than other readers
• TagIQ™ maximizes tag performance
• C-API for development
• Small footprint
• Best-in-class output power (200mW) and noise reduction
• Minimal power consumption

Booth 2048

Spiralock Corporation, known for its self-locking threaded fastening solutions, has added new Drive NotchT Wire Thread Inserts to its line of fasteners, featuring Spiralock's unique 30-degree wedge ramp designed into the internal thread. The benefits of this innovative feature include secure locking and resistance to vibration loosening, improved joint fatigue life, repeated usability, elimination of warranty costs and more. Since there are no tangs to break off and retrieve, installation is faster and the cost is reduced on multiple fronts. These stainless steel DNT wire thread inserts create stronger threads in softer materials such as aluminum, zinc, magnesium and plastic.

Booth 3022

The Swiss Tec Micro-T15 is a compact, high end tube cutting system with a 50W state-of-the-art fiber laser. The unique, all-granite, shock and corrosion resistant body is one of the many reasons for superior accuracy and repeatability.

With a top cutting speed of +2000 mm/min, the Micro-T15 is the fastest system in its class - a typical example of Swiss Tec engineering. 8 microns min. kerf width, contour fidelity of 2 microns, designed for 24/7, user-friendly, high through-put manufacturing.

Booth 1185

Metrix Company provides a variety of custom manufactured disposable medical devices. As a full-service OEM contract manufacturer, Metrix specializes in RF and heat-sealed bags, screen printing, hot stamping, assembly, and packaging.

Web: http://www.troy-mfg.com

Booth 784

Troy Manufacturing is a full-service precision manufacturer, their facility offers contract manufacturing of surgical instruments and precision components for medical equipment and devices. Products include trocars, arthroscopic instruments, wound drainage and conical needles, stylets, cannulas, bone taps, mandrels, dialators, and retrieval devices. Components include shafts, collets, housings and mechanical assemblies. The company has over 55 years of manufacturing experience and the ability to hold tolerances in the millionths. Design assistance, prototyping and full production services are available.

Booth 2242

Our portable IV tube set tester utilizes patented ultrafast mass flow technology. It is fast, easy to operate, and its functionality is traceable to NIST master parts. This model performs checks for:
• leak test
• occlusion (blockage) test
• valve installed in proper direction
Ideal for testing intravenous infusion set and components
• Complete IV Sets
• Valves
• Lubricators
• Drip Chambers
• Infusion Bags
• Flow Regulators
• Tubing
• Catheters

Booth 2242

VIC’s Multi-Lumen Catheter air leak detector incorporates a process-validation plan into your medical manufacturing process.
The Multi-lumen Catheter Leak Test System (MLC) provides an efficient and convenient way to validate up to 5 lumen catheters simultaneously. It uses dry air, or any gas, to automatically perform three tests on each lumen for:
• external leakage
• inter-lumen leakage
• flow test for occlusions
For greater productivity, a second station can be added to the MLC System so that one station is leak testing while the other is unloaded/loaded. Automatic removal of the fittings from the tester at the end of test is another option that accelerates the testing process.
• Fully-automated leak and flow test
• Easy to operate

Booth 937

Vitaltec Corp. acts as a professional and reliable OEM/ODM partner to offer with total solutions: production, assembly, packaging and validation. The company is specialized in thermoplastic injection molding, silicone LIM molding, tube extrusion and blow molding. The main product ranges include: anesthesia, critical care, emergency and respiratory care. All production services are taken place under the certifications of GMP and ISO 13485.

Booth 1578

Watlow's new panel mount EZ-ZONE PM controller extends the integrated control loop functions first introduced in the EZ-ZONE ST integrated controller to the popular 1/32 and 1/16 DIN panel mount package sizes. Watlow's EZ-ZONE PM offers solutions to reduce system complexity and lowers overall cost― configure it in a variety of ways:
. as a PID controller with adaptive tuning,
. as an agency approved, over/under limit controller, or
. as an integrated control loop solution by the two with a high amperage NO-ARC power switching output

Buyers can also select from a variety of industrial communication protocols including Modbus®, Modbus® TCP or EtherNet/IPT.

Booth 2172

Wytech offers comprehensive array of medical wire and services. Wytech Industries, Inc. is a world leader in the manufacture of straightened and cut fine wire and tubing components for the medical device industry. The company features exclusive PTFE pre-coated mandrels that are up to 50% less expensive than standard spray coatings. These mandrels are PFOA and Chromic Acid free, and flake resistant. Stronger, more consistent and thinner than standard spray coatings, Wytech's PTFE coatings are available in a variety of colors, alloys, sizes and shapes. ISO 9001-2000 registered.

Booth 311

Yangbum Engineering Pte Ltd’s services include:
• Precision turned parts
• Precision and complex milling (5 Axis)
• Lead screw and nut assembly
• Optical lens holder focusing housing assembly
• Gear Hobbing
• Turnkey assembly for mechanical components
• Just-in-time delivery of parts
• Vendor inventory management.

The Company is ISO 9001 and ISO 14001 certified, and supports a global customer base. Its parts are used by a range of industries including disk drive, automotive, high end equipment, electronic and electrical, medical instruments and aerospace. Production capability ranges from low volume production to mass production using more than 70 machines.

Product Previews for the 2009 show will be posted in November, 2008. Please bookmark url and return then for expo hall product previews.

Click here for Product Spotlights

Nothing contained on this Web site shall be construed as a contract, joint venture or other relationship between CANON COMMUNICATIONS LLC and any exhibitor, attendee, or other person or entity, or create an express or implied obligation that may be reasonably relied upon or result in liability against CANON COMMUNICATIONS LLC.