ANDILOG Technologies

Booth 6753

The CENTOR STAR digital force gauge possess numerous functions essential for controlling quality today, i.e. adjustable thresholds, storage of the last 100 values and the possibility to transfer the measured data to a PC.
One of the highlights of this gauge is its large back-lighted graphic display; the complete Force/Time curve can be displayed and exported to PC.

Simultaneous display of current and peak values, different measuring and 8h of operation without recharging; automatic sensor recognition (several capacities, force or torque) without set-up procedure of the operator.

Available in different versions from 10N to 1KN, sampling rate of 1,000 Hertz with a resolution of up to 1/10,000 and a total error of less than 0.1 % FS.

Beijing TIME High Technology Ltd.

Booth 6911

TIME Group Inc. is a high-tech leading manufacturer of Testing Instruments and Welding Machines. Our products include Portable and Bench Hardness Testers, Roughness Tester, Coating and Ultrasonic Thickness Gauge, Ultrasonic Flaw Detector, Vibration Gauge and Infrared Thermometer. As well as 8 series of IGBT inverter Welding Machines, including DC Manual Arc Welding Power Source, TIG/MMA Arc Welding Power Source, TIG/MMA Pulse Welding Power Source, AC/DC Pulse TIG/MMA Square Wave Welding Power Source, Air Plasma Arc Cutting Machine, Semi-Automatic Gas Shielded Metal-Arc Welding Machine (CO2/MAG/MIG), Automatic Submerged Arc Welding Machine, Inner Shielded Welding Machine, and etc.

TIME Products have been exported to over 60 countries and regions, We welcome and appreciate cooperation with all friends and business associates for mutual development.

Beta LaserMike Inc.

Booth 7041

Beta LaserMike’s Cutting Tool Measurement System (CTMS) is an easy-to-use non-contact system for measuring effective cutting diameter of fluted cutting tools such as end mills, drill bits, step tools, reamers, and router bits.
By measuring the dimensional characteristics of a cutting tool before it cuts your part, you eliminate scrap that results from an oversized tool and rework that results from an undersized tool. In addition, by identifying and eliminating tool run-out, tool lifetimes can be significantly improved. This is especially important for PCD tools, where even a small amount of run-out can dramatically shorten tool life.

Clearaudit

Booth 6648

Clearaudit is a 100% Web-hosted software service that provides an easy and affordable system to help companies conform to quality standards and accelerate their certification process. The fully-featured software includes capabilities for document management, CA/PA, NCR, calibration, training, management review, internal audits, supplier management, customer complaints, and more, for one low price. Automated email alerts proactively inform quality managers of potential compliance issues before scheduled audits. Clearaudit also provides a unique community forum for sharing best practices related to implementing ISO and other standards, which is integrated into the quality management system. Sign up for a free trial on our website.

Datanet Quality Systems

Booth 7539

DataNet Quality Systems empowers manufacturers to improve their products, processes, and profitability through real-time statistical software solutions. The company’s vision is to deliver trusted and capable technology solutions that allow manufacturers to create the highest quality product for the lowest possible cost. DataNet’s flagship product, WinSPC®, provides statistical decision-making at the point of production and delivers real-time, actionable information to where it is needed most. With over 2500 installed facilities worldwide and distributors across the globe, DataNet is dedicated to delivering a high level of customer service and support, shop-floor expertise, and professional Continuous Improvement, Six Sigma, and Lean Manufacturing services.

Delcam

Booth 7640

The new release of the Delcam PowerINSPECT program incorporates collision detection, an enhanced Geometric Explorer, additional best-fit options for analyzing the results, and improvements to the software’s already industry-leading graphics and report generation. Two new versions have also been launched – an entry-level on-machine verification option for use by machine tool operators and an offline manual version for metrology departments to develop inspection sequences for application using a “play-only” version of the software on the shop floor.

Dunwell Tech, Inc.

Booth 6958

Dunwell Tech, Inc. brings you an amazingly easy-to-use handheld digital microscope Dino-Lite with USB output interface and high resolution magnification at your fingertips! Ideal for applications in the classroom, workplace and even home. It can be used for science & engineering work and study, dermatology (skin/scalp) exam, detailed repair, assembly & quality control (i.e. electronics, mechanical, etc), hobbies & collecting (coin, stamp, watch, jewelry, etc.), law enforcement (counterfeit ID, crime lab, etc.), entertainment, or simply as a reading aid. Just use your imagination! The included "DinoCapture" can easily "capture" either a photograph, video, or time-lapsed video with a simple click!

Fabreeka International Inc.

Booth 7026

The Fabreeka® Delta K™ controller works with low frequency, pneumatic isolation systems to provide both vibration isolation and an increase in repeatability and throughput by allowing a measuring machine to operate at its designed acceleration in harsh environments.

The vibration isolation system with Delta K™ controller is specifically designed to have a very high (stiff) spring rate when the machine is moving and a very low (soft) spring rate when the machine is measuring.

As the moving portion of the machine accelerates and decelerates to the point of measure, the stiff isolators with high damping prevent excess machine motion which can be normal on standard pneumatic isolators.

Greenfield Gage

Booth 7930

Micrometer Caliper Surveillance Master. Greenfield # G701277
Checks 0-6 inch calipers. Made from solid, hardened and cold stabilized steel. Has 12 settings, 6 outside and 6 inside. All accurate to +/-.0001. Design allows to check for out of parallel jaws as well as gear rack or scale wear. Check O D meaurements on one side then turn it over to check I D measurements on the other side. Comes complete with a durable wooden case.

InfinityQS International Inc.

Booth 7613

InfinityQS' eSPC™ is a global SPC solution for real-time quality control across all of your sites and your supply chain. With eSPC, you use just one system to view, manage and control product quality for all of your manufacturing facilities— including your suppliers. Visit our booth to hear from our customers about how they are using this technology to collaborate with suppliers worldwide to achieve dramatic quality improvement. Also hear from our industry experts about how eSPC is helping quality executives take a more active role in enterprise-wide quality management, with real-time visibility into all facilities from a single workstation.

INORA Technologies Inc.

Booth 7740

INORA Technologies, Booth 7740 will feature INORAsrs, its patented 3-D artifact and revolutionary volumetric analysis software. INORAsrs provides the highest level of control over any manufacturing process by rapidly and accurately assessing machine capability and performance. Instead of following assumption-based measurement routines required by other methods, simply probing the four precision spheres on the INORAsrs tetrahedron provides all the information needed by the robust analysis software to generate accurate and reliable results. Manufacturers in the global aerospace and automotive industries use INORAsrs to reduce scrap and minimize machine downtime by optimizing calibration schedules and benchmarking machine capability at regular intervals.

Johnson Threadview Systems LLC

Kurt Manufacturing

Booth 7804

Kurt’s new VB 5-Axis Schenke Vise Clamping System provides continuous 5-axis cutting motion of complex pockets, sculptured and contoured surfaces and intricate 3-D features with repeatable high precision accuracy.
The system provides clamping force up to 8992 lb (40kN) for obstruction-free, high speed machining in all 5 axes. Where conventional workholding limits a 5-axis machining center to just 3-axis operation, the Kurt VB 5AX100 Schenke Clamping System extends the operating range of the machining center to its full output potential. The system is adjustable to handle any desired clamping width and handles a wide range of workpieces with repeatable accuracy.

Kurt Manufacturing

Booth 7804

The new KurtUSB MLX modular building block processes input from various electrical signals with high speed and accuracy and can provide programmable responses for automatic operation. It is ideally suited for stepper motor, gaging systems, automation and PLC applications.

With a powerful CPU that processes electrical signals with amazing speed and accuracy, the KurtUSB MLX can easily be configured to work with several different types of devices including: LVDT probes, air to electric transducers, temperature sensors, eddy current sensors and custom software for unique applications. The MLX can control complex automated equipment through discrete outputs, stepper motors, analog outputs, or remote DeviceNet devices.

Leco Corp.

Booth 7142

LECO's AMH43 features a patented visual method that automatically traces a sample edge to easily position indents and patterns directly onto the overview image of a part. New features include an optional Advanced Analysis Module with complete impression coverage of a sample, as well as pattern support for welding studies. An available Color Hardness/Contour Map displays sample hardness and location with a "color" representation of hardness variances. Ideally designed for a number of applications targeting your market segment—case-depth analysis, surface analysis, weld profiles, decarburization, and coating hardness. The AMH43 supports both microindentation and macro/Vickers hardness testing in fully automatic and semi-automatic configurations.

Mahr Federal Inc.

Booth 7021

Mahr Federal has introduced a new generation of its highly popular Pocket Surf portable surface finish gages. Weighing in at just 14 oz, the new Pocket Surf PS1 can measure more than 24 surface finish parameters with its high resolution inductive probe, and offers a host of new features, including memory, USB connectivity, optional PC software, and a large measuring range that enhances the instrument's versatility for a wide range of applications.

Marposs Corp.

Booth 7605

Marposs introduces its new Optoquick Set V25 Series compact size optical measuring system. The new V25, which provides a measuring range up to 94 mm in diameter, offers a high level of flexibility for non-contact inspection of a wide range of parts using shadow casting optoelectronic measuring technology. Sturdiness and reliability, combined with rapid measurement control plan changeover, make the V25 system simple and fast to use in any shop environment. Marposs' SPC and quality control software, Quick SPC, loaded into into the system's industrial PC, provides a simple and intuitive way to manage measurement programming and overall capabilities.

Marposs Corp.

Booth 7605

The new Merlin compact computer is designed for use on measuring applications where up to 16 characteristics can be displayed in alpha-numeric or graphical format together with basic statistical analysis such as histograms, control charts, value charts, etc. Merlin represents a new gauge computer concept for data collection from traditional or wireless measuring devices. It uses the same technologies created for today's PDA and portable electronic units and runs Microsoft Windows CE 5.0 software. Embedded technology with fan-less architecture and no moving parts assures the highest level of system reliability.

Marposs Corp.

Booth 7605

The new Marposs M1 Wave wireless bore gauge provides unprecedented freedom and accuracy in a durable, easy-to-operate hand-held measuring device. The new M1 Wave bore gauge provides guaranteed 0.5 micron (20 millionths inch) repeatability over the measuring range of 3 to 300 mm diameter.

Marposs Corp.

Booth 7605

The new NanoUnimar ultracompact gauge head for in process grinder control is designed to suit the trend for smaller grinding machines. Its sub-micron accuracy and stability are, with its compact size, the main features in providing a gauge solution when space is restricted and micro components such as fuel injectors, microbearings and other miniature parts are being ground.

Metrology Resource Co.

Booth 6757

MATRIX GmbH Stuttgart, founded in 1997, supplies innovative clamping and fixture systems for complex work pieces with different contours and materials. The MATRIX system is based on the principle of individual movable pins and allows the entire clamping sequence, i.e. insert the part - form the jaws - fix the pins – clamp the part, to be fully automated. The system is hence suitable for use in machining centers and production systems. Preparation times can be drastically reduced using the MATRIX system because the complicated and time-consuming exchange of clamping devices can be eliminated.

MicroDynamics Inc.

Booth 6848

MicroDynamics demonstrates its New 3DQC dual-modality quality inspection microscope system. It provides users both white light/interferometry microscope inspection technology, with special 3D inspection and freehand visualization zoom with multi-texture specimen selections. Sample surface and non-contact roughness inspections will be demonstrated at the QC show, with three systems available, providing new insights into surface roughness, RMS, RA, and full suite of reporting and documentation software.

MicroRidge Systems Inc.

Booth 6633

The new GageWay Wireless System from MicroRidge represents measurement collection technology for today & tomorrow!

The GageWay Wireless System is designed for use on the factory floor, in the lab or any location where you need to connect digital or RS-232 gages and RS-232 devices to a computer through a wireless connection. In its simplest form, the GageWay Wireless System consists of a MiniStation Base unit connected to a PC receiving wireless data from a single Remote unit (Mobile Module or MiniStation Remote), or it can be as complicated as multiple Bases receiving data from dozens of Remote units.

NanoFocus, Inc.

Booth 7827

Introducing the NanoFocus µsurf explorer 3D Non-contact surface measurement system. Resilient design and construction allow this workhorse to perform on the shop floor with the same resolution you would expect in the laboratory. Flexible confocal technology can measure nearly any material (polymer, ceramic, metal, bio-materials, etc.) and the powerful user-friendly analysis software provides the largest range of analysis capabilities, including 2D & 3D roughness, micro-geometry, pass-fail determination and programmable templates. The µsurf explorer requires no specimen preparation and acquires data in seconds; providing you with fast and precise results for your quality control needs.

Optical Gaging Products Inc. (OGP)

Booth 7513

SmartScope® Quest™ 250 is a fully automatic, benchtop, multisensor dimensional measurement system with the patented fully telecentric TeleStar® zoom lens that provides consistent feature sizes anywhere within the field of view, at any magnification. Quest 250 also offers multisensor versatility, and can use video, touch probe, laser, or micro-probes to completely characterize a part in a single setup. All sensors are calibrated to a common reference frame in MeasureMind® 3D MultiSensor metrology software, and can be used interchangeably within the same measurement program. Applications include extremely accurate measurement of small parts of virtually any material, color, fragility, or opacity.

Optical Gaging Products Inc. (OGP)

Booth 7513

SmartScope® MVP 300 is the cost-effective way for manufacturers to get the benefits of automatic video-based measurement with sub-micron resolution. It features a 300x300x150 mm XYZ measurement range, metrologically stable granite column and base, servo-driven motorized stages, and precise 6.5:1 zoom lens with ample 80 mm working distance. Surface and profile illumination, and a high-resolution color camera provide superior images. A touch probe option provides multisensor versatility for hard-to-image or inaccessible features. Measure-X® metrology software ensures completely automated inspection and/or measurement. SmartScope MVP 300 measures parts of any material, texture, or color.

Optical Gaging Products Inc. (OGP)

Booth 7513

The Focus™ Contour Projector® raises the standard for 14" optical comparators, with high-end features unique in its class. Its telecentric optics provide precise, corrected, flat field images, superb contrast, and screen-wide image sharpness. 10, 20, and 50x magnification lenses reside in an internally mounted turret, and are safe from dirt and rough handling. Focus is available in manual or automatic versions, and also features a constant working distance, integrated DRO and multi-function measurement processor, 200x125 mm (8x5") XY travel, optional Projectron™ internal edge detector, and available SmartCheck® metrology software.

Optical Gaging Products Inc. (OGP)

Booth 7513

SmartScope® Flash™ 625 is a small-footprint floor model dimensional measurement system with a 500x610x200 mm XYZ measurement volume (300 mm Z optional). Measurement accuracy is attained through unique designed-in features, like a Y-axis stage totally independent of the X-Z axes, and a metrologically stable granite platform for proper damping and structural integrity. Its AccuCentric® 12:1 motorized zoom lens auto-calibrates at every magnification change, further ensuring accuracy. Available touch probe, TTL laser, and micro-probes add measurement flexibility. OGP metrology software is intuitive yet powerful, providing complete functionality to take full advantage of a multisensing environment.

Optical Gaging Products Inc. (OGP)

Booth 7513

SmartScope® Flash™ 200 is an automatic benchtop multisensor dimensional measurement system with touch probe, laser and/or micro-probes for complete part characterization in one setup. Tactile probing measures difficult-to-image features, and through-the-lens (TTL) laser adds non-contact surface contouring. Exclusive Feather Probe™ and Rainbow Probe™ offer micro-probing for miniature or delicate components. Flash 200 measures parts of any fragility, color, or opacity. For video measurement, SmartScope Flash 200 features a patented optics-tracking LED backlight; patented SmartRing™ white LED surface light for variable light direction and angle; and TTL coaxial surface illuminator.

Optical Gaging Products Inc. (OGP)

Booth 7513

SmartScope® Quest™ 600 is a fully automatic, multisensor dimensional measurement system with unique, fully telecentric TeleStar® zoom optics. This large capacity bridge-design system offers sub-micron precision, and features heavy-duty stages and designed-in laser, touch probe, and micro-probe support. With the optional SP25 scanning probe, Quest 600 automatically acquires surface data points via continuous contact. All sensors are calibrated to a common reference frame in MeasureMind® 3D MultiSensor metrology software, and can be used interchangeably within the same measurement routine. Its 450x610x250 mm XYZ stage travel accommodates a wide variety of parts and fixtures, of any material, texture, opacity, or color.

Proquis Inc.

Booth 7931

PROQUIS Enterprise V3.0 is a highly sophisticated web site used to fully manage specific data important to your business. This includes documents of all types e.g. Specifications, process maps. It provides customer centric information management giving managers and staff the ability to ensure continuous improvement in customer satisfaction and thus company profitability.

Data is accessed via Intranet or Internet in a highly secure way with unique levels of controlled access. With no special software on the workstations, it is an ideal solution for remote or multi-site access and co-operative data management. Take only modules that benefit your organization.

Proquis, Inc.

Booth 7931

allCLEAR, the process mapping/flowcharting software, has been shown to be a massive 75% faster. It moves away from the drawing packages that only allow you to drop your boxes, then write the text inside. allCLEAR, with its text-to-graphics capability, can drag and drop boxes and clusters or simply type in the right hand column the text that you want inside the boxes. With the use of simple punctuation, the process maps are drawn for you in a logical flow that is pre-written. The process maps can be ‘drilled down’ to an unlimited number of layers and even attach to boxes external document links, web links and other process maps.

RAM Optical Instrumentation (ROI)

Booth 7020

StarLite™ GX is a compact non-contact measurement system with a unique ergonomic design, motorized zoom optics, color camera, and ample 6” x 3” x 5” XYZ capacity. StarLite GX is built for precision measurement, with a sturdy cast aluminum base and column, precise coarse/fine manual stage positioning, and one-micron resolution linear scales. Its high fidelity white ring light and back light illuminators provide optimal image quality. StarLite GX is small enough to fit on any workbench, yet large enough for routine inspection and measurement.

Shimadzu Scientific Instruments

Booth 6921

Shimadzu’s new AG-X Series of Universal Testers streamlines the user experience while making measurement a breeze with world-class specifications like test force measurement precision of 1/1000 ±0.5%, highly rigid large-capacity load cells, 5 kHz sampling, & 1 M pulse/second resolution. Developed using cutting-edge Microsoft .NET technology, TRAPEZIUM X software makes it possible to perform efficient analysis anywhere with USB memory. Additionally, the software allows scientists to combine graphed results from separate tests, create histograms and X-barR charts, and easily access data from any Web-based environment.

Spectronics Corp

Booth 6630

New Digital Radiometer/Photometer

The Spectroline® AccuMAX XRP-3000 is an advanced digital radiometer/photometer that utilizes a dual-wavelength sensor detector to measure both ultraviolet and visible light. Specially engineered for NDT applications, the unit complies with MIL and ASTM specifications for MPI and FPI.
The microprocessor-controlled readout unit provides accurate readings for UV, visible irradiance, visible illuminance or luminance (using optional luminance sensor), with excellent cosine response. Additional features include choice of direct or USB cable connection between sensor detector and readout unit, three operating modes (normal, integrate, automatic zero — all with signal hold), user-defined power save, automatic shutoff and multifunction access with the touch of a button.

Te-Co

Booth 7125

TE-CO offers a new line of modular CMM fixturing, making fixture building easy. We have five aluminum fixture plate sizes available along with a large selection of positioning and clamping components for holding parts during inspection. Slash your setup time and have the ability to build repeatable fixtures - find out how by visiting us at the show in booth #7125.

Thermo Scientific NITON Analyzers

Booth 6562

Thermo Fisher Scientific introduces the Thermo Scientific NITON® XL3 Series XRF analyzer – the best analytical solution for a variety of industries. Whether it’s alloy analysis where the need is quality control, sorting of scrap material, or even failure analysis or the need to know, absolutely and positively whether toxic materials are included in consumer goods, the XL3 analyzer answers the call. The easy-to-use instrument provides rapid, direct elemental analysis of virtually any sample type, in the field or lab. With its tilting color touch-screen display and ergonomic design, the XL3 Series is the next generation from the world’s leading manufacturer of handheld XRF analyzers.

Verisurf Software

Booth 7815

Verisurf “Caliper” is an exciting new software product from Verisurf Software, Inc. that allows users to automate the process of inspection and reporting with powerful modern features beyond anything ever offered in the industry. Manufacturers can take their native CAD models from Autocad/Autodesk, Solidworks, Pro-E, Catia, UG, and many other popular formats and very simply create and implement user-prompted, automated inspection routines. Dimensions from the CAD model can be used automatically, eliminating the need for manual input. Customizable reports are generated automatically, and mapped output for database SPC is included. Works with many types of input devices including digital calipers.

VIEW Micro-Metrology

Booth 7024

Pinnacle™ 250 is an automated precision dimensional measurement system with a 250x165x100 mm XYZ measurement range. A precision compound X-Y stage with high-speed linear motor drives provides velocity of 400 mm/sec and acceleration of 1000 mm/sec2 delivers unmatched accuracy and throughput. Its dual magnification optics is a unique imaging system that allows the user to switch instantly between different magnifications without any moving parts. Pinnacle’s unique optics, illumination, and linear motion technology provides the fastest, most accurate, and reliable platform available for operation in a production environment.

Vision Engineering Inc.

Booth 6711

Vision Engineering introduces Merlin 300 – 2-axis video measurement system - delivering exceptional price to performance ratio - easy to operate.

Consistent emphasis on measurement systems that offer excellent repeatability - reproducibility, Merlin 300 allows users to “plug and play”. Offers video image solution to measuring parts, system increases accuracy, repeatability by removing operator error.

New Merlin 300 includes dedicated Quadra-Chek 300 video microprocessor with touch-screen technology, Video Edge Detection. This package provides faster, higher throughput measurements – ideal for batch routines or measurement of form features. QC300 equipped with automated point data capture, full PC connectivity.

Completing Merlin 300 package: high numerical aperture objective lenses maximizing illumination efficiency; long life dimmable LED surface and sub-stage illumination.

Vision Research Inc.

Booth 6762

Vision Research, a leading manufacturer of high speed digital imaging systems, announces its new Phantom® Miro™ family of digital cameras. The Phantom Miro line is a compact, lightweight, rugged family of high-speed cameras targeted at industrial applications ranging from vehicle crash testing to engineering and scientific research. The cameras are battery powered and can be used untethered from a power source and feature a touch-screen LCD for feature set navigation and instant playback of high-speed videos.

The Phantom Miro cameras feature a high-performance blend of resolution, speed, and light sensitivity for situations demanding high-speed image capture and motion analysis.

Winslow Engineering Inc

Booth 8026

The Winslow Engineering Model 560 Video Tool Analyzer permits rapid, precise inspection of all tool geometry characteristics in new tool manufacturing as well as tool regrind. The system uses a series of lenses and a camera. The image of the tool being analyzed is displayed onto a video monitor. A Windows® XP compatible software analysis program is displayed on the monitor where the tool analysis is conducted.

The Model 560 Video has a simple to use yet powerful software program for Windows XP® that provides the means to acquire, archive, analyze and annotate video images.

Nothing contained on this Web site shall be construed as a contract, joint venture or other relationship between CANON COMMUNICATIONS LLC and any exhibitor, attendee, or other person or entity, or create an express or implied obligation that may be reasonably relied upon or result in liability against CANON COMMUNICATIONS LLC.