AAAmachine Inc.

Booth 1605

AAAMachine Inc. is a U.S. marketing/technical-consulting company of powder-handling equipment manufacturers from outside of the United States, including MASUBO Corp. (mechanical mills, air classifiers, granulators), Nisshin Engineering (air classifiers, jet mills, sprayer), Matsushima Machinery Lab. (Level sensor), Fujisaki Electric (Spray dryer), ACO (deduster), Exen (air knocker), etc. AAAmachine is also introducing US equipment to abroad.

AAAmachine, Inc.

Booth 1607

AAAMachine Inc. is a U.S. marketing/technical-consulting company of powder-handling equipment manufacturers from outside of the United States, including MASUBO Corp. (mechanical mills, air classifiers, granulators), Nisshin Engineering (air classifiers, jet mills, sprayer), Matsushima Machinery Lab. (Level sensor), Fujisaki Electric (Spray dryer), ACO (deduster), Exen (air knocker), etc. AAAmachine also introduces US equipment to foreicn contries.

ACO Company Ltd.

Booth 1605

Cyclone Jet Floss Separator is a cyclone type static deduter. EASY maintenance/cleaning, less expensive than electric static controlling deduter, great dedusting performance and laboratory model demonstration/test is possible at AAAmachine laboratory in Chicago. Case examples will be introduced during the show. Perfect machine for plastics/recycling industry.

American Process Systems - Member Eirich Group

Booth 3541

American Process Systems, Member Eirich Group, is pleased to introduce the next generation in mixing! As the newest addition to our complete line of mixing equipment, the OptimaBlend™ Fluidizing Paddle Blender is a balance of mixing speed and efficiency with low equipment cost and consumed power. Traditional ribbon blender applications will benefit from increased capacity in the same space. Difficult & diverse ingredients can now be mixed quickly with high efficiency.

ASI Instruments Inc.

Booth 1254

Volumetric Belt Conveyor
Booth 1254 - The LaserTrak 2D (LT2D) is a laser-based noncontact volumetric belt conveyor scanner that measures the flow of dry products on conveyor belts. A direct replacement for load cells, the unit can be installed quickly and conveniently without stopping the belt. It features a noncontact laser scanning head, an integral Doppler radar speed sensor, an integral laser pointer for alignment, and integral dust tubes. The LT2D performs material profile scanning and speed measurement in a single unit. It outputs material flow and has a totalizer function for real-time mass calculation of throughput. The system does not require routine maintenance.

B3 Systems Inc.

Booth 3813

Advanced Communication for Bag Leak Detectors
B3 Systems is the US distributor for PCME's bag leak detectors and PM detectors and has developed an Ethernet communication option for PCME's advanced DT990 products that allows easy integration into existing control networks. The unit allows simultaneous communications through Modbus-TCP, Ethernet/IP and your web browser. This reduces the total cost of installation, allows integration into existing plant structures and puts the right information into the hands of the right people. The system also provides a simple and easy way to meet regulatory compliance requirements when combined with our ODBC data access.

Delavan Spray Technologies

Booth 2815

Delavan's continous improvement on nozzle technology is exampplified in the patented sealess check valve assembly. This unique product addition to our established SDX spray nozzle, offers an efficient tool for start up and shut down.

Eastern Instruments

Booth 2640

Eastern Instruments will be introducing plug resistant VAP³® Pitot technology for industrial applications where accurate air flow measurement is needed for process control and the High Beta® Flow Element, which utilizes VAP³® Pitots, and straightens flow profiles in complex duct systems for accurate measurement. VAP³®/PA Pitots (for Particulate Applications) and VAP³®/SA Pitots (for Standard/Clean Air Applications) are designed to provide accurate differential pressure outputs allowing for precise airflow measurement or control of your process. The High Beta® Flow Element is ideal for either new or retrofit applications where insufficient straight duct runs are present and/or accuracy is required.

Everlasting Valve Co.

Booth 1022

The Everlasting Bulk Material Valve features unique rotating / shearing discs which are self lapping as they polish away scratches that may develop on wide sealing surfaces. The live loaded stuffing box increases stem seal reliability and enables the packing to be replaced without removing valve from line. Abrasive media applications include silo & bin discharge, transporter fill, discharge and vents, line isolation with two valves and wye diverting on the fly. Sizes 2¡¨ through 14¡¨ including 5¡¨; vacuum to 100 psig; 550„aF; ANSI flanged connections, cast iron, carbon steel construction, hardened alloy sealing components; pneumatic operator, U.S. patented.

Exen Corp.

Booth 1605

Air Knocker for hopper discharge to prevent from bridging, ratholing, arching, adherence to wall. Exen Air Knocker is a superb bridge breaker -flow aid device, superior to vibrator or air blaster especially for very fine/sticky powder, such as in toner, ceramics, minerals, food, chemical industry.

Feeco International Inc.

Booth 1600

FEECO International, Inc. is an industry leader in the field of drying. Our designs can address a vast array of materials and processing requirements. We can supply rotary dryers, coolers, kilns, calciners, and combination dryer-coolers. All of our designs are developed with efficiency, durability and process flexibility in mind. Our thermal systems can be designed in virtually any configuration; parallel flow or counter-current flow, direct or indirectly fired, utilizing a variety of fuel sources such as natural gas, oil, steam, waste heat, steam, etc. We can supply single stand-alone thermal processing units or as is our preference, complete systems.

Fike

Booth 2311

The Fire Limiting Explosion Vent panel, Fike’s Flex-V™, is a high performance explosion protection device, uniquely designed to allow fire-fighting agents the opportunity to effectively control fire situations. Unlike traditional explosion venting, the Flex-V is designed to return to its original position at the end of the venting process, thereby re-covering approximately 90% of the vent relief area, shortening the venting process and reducing the ingress of fresh air (oxygen). The Flex-V “re-closure”, greatly reduces the risk of secondary explosions within the process vessel and allows for more efficient post-explosion fire fighting, because the suppression agents can now be injected into a re-confined space. The FLEX-V can also open inward, offering protection against vessel collapse due to post explosion vacuum.

Floveyor Pty Ltd.

Booth 1931

Floveyor Pty Ltd, the manufacturer of the original Aero-Mechanical conveying machine, is a worldwide supplier in the field of powder and granular conveying. At the PTXi 2008, we will release the next generation "FLOVEYOR II" that will offer a range of housing materials, improved flexibility of system design, and the full range of fully sealed wire rope assemblies for those special applications. “FLOVEYOR II” will meet your needs for efficient, low cost powder and granular conveying. The F3 range is to be released at PTXi 2008.

Flow Valves International

FLSmidth Inc.

Booth 5116

FLSmidth’s Fuller-Kinyon™ Pump

Thousands of Fuller-Kinyon pumps installed worldwide testify for their heavy-duty construction, ease of maintenance, design simplicity, cost effectiveness, ability to handle high capacities, and fuel efficiency / low power consumption. FLSmidth’s FK Pump is ideal for conveying fine powders without risk of blowback. A material seal is formed when product is forced against the counterweighted flapper valve preventing convey air leakage back through the screw. One moving part means less maintenance and high reliability in the most demanding environments. Parts can be replaced without removing the pump from service.

FLSmidth Inc.

Booth 5116

Unload PD trucks and railcars FASTER!
Pneu-Boost™ Conveying Booster
FLSmidth’s Pneu-Boost system reduces fuel costs, minimizes wear and tear on the delivery vehicle and simplifies unloading, making this an ideal choice for increased unloading efficiency.
• No modifications to the delivery vehicles needed
• Faster turnaround
• Longer convey distance
• Self-contained mobile system, skid-mounted
• Automatic operation, no valves to adjust
• Virtually eliminates plugged lines
• Completely assembled and ready for use

Fluid Imaging Technologies

Booth 4515

Fluid Imaging Technologies makes the FlowCAM®, a rapid imaging particle analyzer that combines the qualitative capabilities of microscopes with the speed, precision and statistical significance offered by rapid particle analyzers. It measures particle count, concentration, size, shape and a number of other appearance parameters, in addition to providing an image of every individual particle analyzed. Operators can quantify and qualify sub-populations, such as particles above a certain size, within a data set. The FlowCAM can therefore show how many oversized particles are in a sample and whether they are in fact oversized particles or merely agglomerations.

Fluid Imaging Technologies

Booth 4515

Fluid Imaging Technologies makes the FlowCAM®, a rapid imaging particle analyzer that combines the qualitative capabilities of microscopes with the speed, precision and statistical significance offered by rapid particle analyzers. It measures particle count, concentration, size, shape and a number of other appearance parameters, in addition to providing an image of every individual particle analyzed. Operators can quantify and qualify sub-populations, such as particles above a certain size, within a data set. The FlowCAM can therefore show how many oversized particles are in a sample and whether they are in fact oversized particles or merely agglomerations.

Fujisaki Electric Company Ltd.

Booth 1605

The Micro-Mist-Drayer�iMD�jwith the unique technology 4-Fluid-Nozzle features large atomizing capacity of particles in Single-Micron size with control of liquid particle size resulted in sharp/narrow particle size distribution. MD dries and transforms samples from ceramics, cosmetics, pharmaceutical and biochemical industries into a very fine and uniform powder in a micron particle size to comply with larger scale production to meet the requirement for a specific duty(water evaporation speed 3kg/h).

Gilson Company, Inc.

Booth 2741

Gilson’s Performer III 3” Sieve Shaker, model SS-3, is designed for small samples of fine powders to coarser materials making this unit ideal for QC/QA and R&D. The SS-3 accepts up to 7 full-height 3” metal sieves or 14 acrylic sieves and a pan. Other features include:

• Quiet, electromagnetic vibratory action
• 0-100% amplitude control
• Optional tapping action
• Precise digital timing

The Performer III’s compact size, small footprint, and quiet operation make it an extremely desirable instrument for dry powder sample separation.

Hardy Instruments, Inc.

Booth 1845

Hardy Instruments offers flexible, accurate and reliable weighing equipment, and will display its weight controllers/indicators, rate controllers, Allen-Bradley compatible plug-in weigh modules, load cells and scales. Only three inches deep, the HI 4050, Hardy’s weight controller, is available in panel, remote or blind DIN rail mounting, and installs fast, with no special holes to cut. The controller comes standard with EtherNet, and optional Ethernet/IP, DeviceNet, Remote I/O, and Profibus. It includes WAVERSAVER® to eliminate the effects of surrounding vibration, C2® electronic calibration without test weights, and a Secure Digital (SD) based Memory Module card for fast transfer of configuration data.

Hawk Measurement America

Booth 5324

Gladiator Microwave Switch.
Point level switching for presence or absence of most solid and liquid materials. Environmentally and personally safe replacement for nucleonic switches. Used in any application where microwave energy is aborted by the material being monitored, including replacement of traditional contact switching devices.

Hawk Measurement America

Booth 5324

GSM/CDMA Communication-HawkLink GSM/CDMA communication device allows any authorized computer with standard modem and GosHawk software to dial in and calibrate, test or check on the performance of the connected Hawk product. The HawkLink device can be wired to the standard communication terminals of the Hawk products.

Hawk Measurement America

Booth 5324

Gladiator Vibration Switch.
Provides a level limit detected of fine grainen free-flowing solids including very low density and pneumatically conveyed medium, powders, plastic, chips, cement, sand, sugar, food grains, etc. Also used for indicating an empty tank, switching of conveyors when a vessel is full.

Hawk Measurement America

Booth 5324

Sultan Acoustic Wave for solids
The Sultan is a non intrusive acoustic wave transmitter with flexibility, used for level measuring of liquids, slurries and solids. The transmission of high powered acoustic waves ensures minimal losses through the environment where the sensor is located. Solids level and position measurements to 597ft. Primary areas of applications: Water/waste water, mining, power stations.

Hawk Measurement America

Booth 5324

Gladiator Admittance Switch
Simple combination of point level measurement and communication technology. Designed to detect the level of liquid, slurry or powder in a tank or vessel. The unit measures the capacitance or “admittance” between a probe and the wall of the container. Operates in tough industrial environments. Primary areas of applications: Water/waste water, mining, food, chemical, cement, etc.

Hy-Safe Technology

Booth 2744

Premium full body X-treme harness series are specially designed for comfort, ease of use and durability. Adjustable chest, waist and leg straps provide a better fit.Quick connect buckles allow for fast and easy donning of harness. The comfort back pad keeps the harness in a vest style shape for ease of putting on while still allowing comfort and security. The padded legs and back are made of an open cell foam material that allows for air circulation. Options include Hi-Visibility or all black webbing. This harness meets all applicable OSHA and ANSI standards.

JOA North America

K-Tron Process Group

Kemutec Group Inc.

Booth 3519

The PPS Air Classifier Mill, for the fine grinding of powders to less than 10 microns, incorporates an internal air-classifying wheel with independent drive giving precise control over “particle cut point” selection. Suitable for batch processing or continuous operation this range of mills serves all industries producing fine powders where control of grinding temperature and particle size distribution are of prime importance. PPS Mills are available with fully opening “clam shell” body designs enabling easy access for rapid product changeover, inspection, cleaning and maintenance.

LCI Corporation, Separations/Drying

Booth 3624

Both Heating and Cooling Available in Single Drying / Recovery System

LCI Thin-film Dryers are used to convert liquids, slurries, and pastes to free-flowing solids in continuous, single-pass operation. The compact Vertical and Horizontal thin-film dryers can be operated individually or together as the Combi™ Dryer. LCI Dryers have a short residence time and are very effective in processing heat sensitive products due to low “hold-up” and self-cleaning heating surfaces. An excellent technology for catalyst recovery, salt drying, and glycerin recovery.

Littleford Day Inc.

Booth 1238

Littleford Day is offering a newly designed Horizontal Ploughshare® mixer that is EASY TO CLEAN. The full access door across the front of the mixer provides for greater access to perform frequent cleaning operations. This new "EASY CLEAN" design is available on batch or continuous mixers. The Littleford "EASY CLEAN" design provides a substantial benefit to manufacturers who are concerned with cross contamination from batch to batch in their operation due to allergens, flavors, colors, and formula changes. We will also be displaying our FM-130 Plexiglass Unit showing the mix action.

Malvern Instruments Inc.

Booth 2415

The new version Insitec Voyager on show from Malvern Instruments is perfectly adapted for mobile particle size analysis within the process environment. It can be operated at- or on-line providing real-time analysis where and when required. It is an integral part of Malvern’s successful consultancy service, used to demonstrate, in situ, the potential of continuous process analysis. Built for single person operation, the unit is easily dismantled for transportation and can be assembled without the need for hand tools. It is simple to connect to the process, easy to clean and has a variety of communications options.

Material Transfer & Storage

Booth 3917

Since inventing the industries’ first hydraulic Bulk Bag Conditioner in 2001, Material Transfer has provided application specific bulk bag conditioning solutions for a wide range of industries. New patent-pending system utilizes hydraulically actuated conditioning arms and a rotary lift table to quickly, safely, and efficiently return even the most problematic hardened materials to a manageable, free-flowing state. System’s pivoting conditioning arms provide deeper material penetration for more effective results than traditional vertical compression plates. Unit features an ultra compact footprint, user-friendly touch screen controls, and full machine guarding for completely automated conditioning cycles.

MATSUBO Corp.

Booth 1605

The pulverizing mechanism of Turbo-Mill (horizontal rotor mill) is due to the percussion caused by high speed revolution of the wings, the innumerable ultra-violent vortexes which break out behind the revoluted wings, and the high-frequency-vibrating air caused by these vortexes, besides the usual pulverizing mechanism of simple impact and shearing. As the results, any brittle material could be pulverized into the several microns, and any sticky or elastic materials and heat sensitive materials could be processed to the satisfactory extent. Perfect machine for toner industry to achieve pulverizing and spheridizing at the same time.

MATSUBO Corp.

Booth 1605

"Elbow-Jet Air Classifier" is the world's first air classifier that can perform simultaneous multiple classification of fine dry powder. Particle size can be controlled precisely and easily, and cleaning and maintenance are extremely easy due to its simple design. Besides, scaling up from the smallest model to the largest is also accurate and easy. Exhibited Model EJ-L-3 "LABO" is for laboratory use, and offer the additional features; (1) Classification points can be determined automatically. (2) All necessary auxiliary equipment is built-in as a package with casters for easy conveyance. (3) After connecting electricity and compressed air, it can operate at once.

Matsushima Machinery Laboratory Company Ltd.

Booth 1605

Matsushima Machinery Laboratory Company Ltd. is a leading manufacturer of various industrial equipment. The company provides level indicators; FMCW radar, pulse radar, ultrasonic and electro-mechanical system, microwave based particle flow detectors, dust monitors, electric actuators, and conveyor protective devices made especially for heavy duty industries such as iron, steel, cement, chemical, and power plant.

McGill AirSilence LLC

Booth 1652

Soundscreen panels and equipment enclosures provide excellent thermal and acoustical control for blowers, fans, compressors, pumps, and other bulk handling equipment. By enclosing the entire noise source noise levels can be reduced to within OSHA specifications, typically 20-25 dBA. Outer shell construction is solid galvanized steel with acoustical/thermal fiberglass batt insulation fill and either a solid or perforated inner liner of galvanized steel. The fiberglass insulation will not settle or promote the growth of bacteria, mold, vermin, or insects. They are available in durable 2- and 4-inch-thick panel constructions with maintenance access and ventilation, and are suited for indoor or outdoor applications.

MECO Shaft Seals, Div. Woodex Bearing Company Inc.

Booth 2531

MECO will be promoting its latest advances in custom shaft seal design, including seals fitted for ATEX or CIP service and performance up to 1000 sfpm of shaft speed on dry-running shafts. Custom-engineered to each application, MECO seals accommodate high shaft run-out on vertical, inclined or horizontal shafts, 1” to 20” in diameter. Users report increased machine efficiency, especially in vacuum applications. MECO’s patented seal designs are available fully-split and use very low purge gas flow rates. MECO seals have been manufactured in Maine since 1984 by Woodex Bearing Company, Inc.

Midwestern Industries

Booth 2225

Midwestern will be displaying a fully operational ME Series Separator. This uniquely designed separator allows for more control due to its variable speed pulley and a motor mounted on an adjustable slide base. In addition to its quiet design, the ME Series Separator has lower operating costs. Stop by booth #2225 for more information and a demonstration.

Modern Process Equipment

Booth 2435

Improve yields, reduce fines and lower your energy usage with MPE’s Gran-U-Lizer™ technology.
On display at this year’s show will be MPE’s recently-introduced, fully-automated “89” Gran-U-Lizer – A superior grinding solution for friable materials. The “89” uses engineered roller technology to introduce stress fracture points into particles and gradually grind materials down to uniform sizes. The fully-automated features of this unit include particle size and density control and feedback systems as well as water-cooling. MPE’s Gran-U-Lizer technology can be applied to thousands of food, chemical, mineral and pharmaceutical grinding applications. Stop by MPE’s Booth #2435 to experience the Gran-U-Lizer today.

Monitor Technologies LLC

Monitor Technologies LLC

Monitor Technologies LLC

Monitor Technologies LLC

Newson Gale Inc.

Newson Gale Inc.

Newson Gale Inc.

Nisshin Engineering Inc.

Booth 1607

Turbo Classifiers, which are the first to achieve sub-micron classification, realize high precision classification of particles, controlling characteristics of various materials including metal, ceramics, electronics material, polymer, complex material and according to the purpose of their use. Fluid energy jet mill, CJ/SJ series can be easily combined with Turbo-Cllassifier in open/closed circuit. This will improves production efficiency enormously and drastically. Perfect machine to produce fine powder below 1.5-10 microns top size powder.

Prater-Sterling

Booth 1405

Prater-Sterling has developed the M-Series fine grinder for grinding dry, free flowing material as fine as 200 mesh
(75 microns) with very tight distribution of particle size. It is well suited for heat-sensitive materials such as resins, sugar, and powder coatings. The highly efficient design allows for ease of access to all internals, as well as close tolerance between the rotor blades and the grinding jaw/screen frame assembly to produce a more uniform and finer grind. Precision tolerances are maintained between the rotor blades and the stationary grinding surfaces to allow for accurate control of finished particle size and distribution.

Prater-Sterling

Booth 1405

The Prater-Sterling Dust Collector Series Airlocks feature eight blade rotors, precision machining, and rugged cast iron housing for efficient operation. These airlocks can be configured for most application requirements, and are suited for general use under dust collectors, cyclones, and hoppers. The larger pockets (50% more volume) in the airlocks allow them to run at a lower speed, and are designed to provide the benefits of a longer life with less maintenance and higher return on investment.

Precision Machine & Manufacturing Inc.

Booth 2725

Precision Machine & Mfg., Inc. recently announced the introduction of the PMV UltraValve. The latest in a long line of innovative material handling products for challenging environments from Precision Machine, the UltraValve complements the famously tough severe-duty PMV rotary valve line. The UltraValve uses a unique case hardening process that significantly increases abrasion- and corrosion-resistance while exhibiting extremely high fatigue strength. Like other PMV rotary valves, the UltraValve can be quickly rebuilt from off-the-shelf parts, making it a sound investment for the long haul.

Premier Pneumatics Inc.

Booth 1328

Premier Pneumatics introduces its ProBlendTM Zone Blender for blending or homogenizing free flowing bulk material within a hopper or silo (Booth 1328). With its special geometric shape, the compact and simple Zone Blender provides multiple flow zones in which the material can pass through at different velocities and residence times. As a result, the discharged material contains a uniformed blend of material from the hopper or silo. The Zone Blender uses a combination of mass flow (first in – first out) with funnel flow (last in – last out) to help homogenize the blend and reduce the effect of segregation in re-circulating, batch or continuous systems, or any application requiring the blending of materials.

Premier Tech Systems

Booth 1645

The AR-200 Robotic Palletizing Cell handles up to four different products simultaneously with custom grippers for bags and boxes. At speeds of up to 25 units per minute, the AR-200 uses the latest addition to the FANUC robot family in the high payload 4-axis category. It also offers an option that eliminates manual adjustments for bag size changeover. This feature allows the robot to automatically adjust gripper opening when changing bag size. The AR-200 can palletize all types of open-mouth bags and polyethylene FFS bags in a conventional way, stack them into tote boxes, or place them into boxes individually.

Rail King - Stewart & Stevenson

Booth 4924

The Rail King Mobile Railcar Mover was developed and introduced to the market in 1990 by Stewart and Stevenson. It is a reliable, efficient and cost effective service vehicle, which supports various switching operations throughout the world. With six different models available, we feature side-mount or full-width cabs with dual directional ergonomic controls for quick, easy movement of railcars in any application. Our mobile railcar mover is a result of exhaustive customer assessment, performance testing, and engineering enhancements. Rail King is supported by a vast distributor network that can provide unequaled service and parts support after the sale.

Schenck AccuRate

Booth 1055

For metering a variety of powders, granules, chips, flakes, and fibers Schenck AccuRate announces its latest product offering the MECHATRON® Coni-Steel Vibro Feeder. With a uniquely designed maintenance free feed chute, dry solid materials are gently metered for applications in the plastics, food, chemical, and pharmaceutical industries. Volumetric and gravimetric configurations of the feeder are available with complete disassembly from the non-process side for easy cleaning and maintenance. The new stainless steel vibratory feeder is capable of accuracies greater than ± 0.5% and feed rates from .01 to 53 cubic feet per hour.

Sturtevant Inc.

Booth 3635

Sturtevant Inc., an international manufacturer of engineered material-processing equipment will demonstrate material process flows through animated presentations. Sturtevant will also display equipment lab testing videos for each line of equipment filmed at the Sturtevant Laboratory in Hanover, MA. Products include Micronizer® jet mill, NSP Powderizer® air classifying impact mill, Simpactor® pin mill, hammermill; roll, jaw and rotary crushers and sample grinder. Three types of air classifiers are available. Free consultation on your size reduction or product classification challenges. Process improvements, equipment replacement, replacement parts and suggestions available from factory personnel.

Unity Scientific Inc.

Booth 3512

Unity Scientific is introducing the new SpectraStar 2500 RTW (Rotating Top Window) Near-Infrared analyzer for at line QC analysis. Unity offers a variety of at-line and on-line analyzers and monitors to measure constuents in powders, liquids, solids and slurries. Our systems are used in many different industries such as chemical, food, polymer/plastics, agriculture and pharmaceutical. Unity also offers a line of Speck Analyzers for both at-line and on-line analysis of impurities in samples during the manufacturing or processing stages.

Valley Craft

Booth 4720

Along with a standard line of material handling, Valley Craft now provides specialized solutions. Ovation service solves needs that can't be satisfied with standard products, and works with your company to create material handling products and solutions that fit your unique business demands. Production begins with a script; an in-depth needs assessment. A talented cast of characters develops concept sketches and a quote that emphasize reduced waste and increased throughput. Set design begins with 3D renderings and a prototype. Upon approval, the production begins, which culminates in superior turn-around time and a product that meets your needs. Visit booth 4720.

VIBCO Vibrators

Booth 2331, 5206

VIBCO has revolutionized the production of vibrating tables to dramatically reduce lead times. The great news for customers is that VIBCO's high quality, patented, live-top vibrating tables can now be delivered faster with increased quality, durability and craftsmanship. US-TT vibrating tables are now available to ship same or next day (vs. 2-4 weeks) and US-RD tables will ship within 10 business days (vs. 4-6 weeks). That means that VIBCO customers will be able to have the vibrating tables that they want, when they want them.

Vortex® Valves North America, a Division of Salina Vortex® Corp.

Booth 3645

The Global Leader In Valve Solutions™, Vortex® introduces the patent-pending Quantum™ Series Wye Line Diverter™ specifically engineered to handle dry bulk solids in dilute phase pneumatic conveying systems with vacuum or positive pressures up to 15 PSIG (1 bar). Trouble spots in conventional rotating plug or flapper diverters are eliminated with Quantum Wye Line Diverter™, which provides superior sealing, low installation weight, fast “in-line” maintenance, and an abrasion-resistant design for long-term, reliable service. For over 30 years, Vortex® has precision manufactured Slide Gates, Diverters, and Iris Valves designed specifically for handling dry bulk solids in gravity or pneumatic conveying applications.

Young Industries