Comco Inc.
Booth 2221
Comco is the industry leader in micro-abrasive blasting technology and creator of the award-winning MicroBlaster®. Established in 1968, Comco’s innovative thinking and high quality standards have been key to Comco’s success. Micro-abrasive blasters are used for deburring, surface preparation, selective cleaning, material removal and focused cutting in a variety of industries including medical manufacturing, microelectronics, precision machining and the aerospace industry. Comco prides itself on its high quality products and excellent customer service and tech support.
KNF Neuberger Inc.
Booth 740
KNF's model NPK09 swing-piston compressor offers the OEM a higher flow rate and pressure for a given size than the corresponding diaphragm system. With the addition of a brushless DC motor, they feature compact size, quiet operation, long life, reduced EMI/RFI and are lighter than brush DC types, making them perfect for portable applications. Speed control, speed signal, and logical on/off allow for integration into system logic. Rated at 15 LPM flow, they generate 100 psi pressure and vacuum to 27" Hg. These pumps were developed for use in medical equipment such as nebulizers, suction apparatus and as a pneumatic air source.
KNF Neuberger Inc.
Booth 740
The pump is extremely compact (31 x 26 x 28 mm), lasts over 10,000 hours, uses <1 watt of power. It is suitable for pumping and dosing both neutral and corrosive liquids. Featuring a suction height of 13 ft. water, the device will pump back pressures up to 14 psig. These pumps are maintenance-free, self-priming and can run dry without damage.
There are many applications which require small quantities of liquid to be dosed accurately. In situations like these, the new NF5KTDC-B4 micro diaphragm pump from KNF Neuberger, Inc. is an ideal solution.
Miyachi Unitek Corp.
Booth 1725
Miyachi Unitek Corporation announces the availability of a line of turn-key laser welding glovebox systems for medical device manufacturing. Consisting of a Miyachi Unitek AX5000 industrial glovebox, and integrated with a Miyachi Unitek welding laser, a multi-axis motion control system, application-specific tooling, and optional peripheral equipment, Miyachi Unitek Laser Welding Glovebox systems offer precise control and monitoring of the laser welding process, motion control, and enclosure gas composition. MUC’s DeltaMotion multi-axis motion control system and user interface provides unparalleled performance for demanding contour seam welding applications. With standard and optional features, moving from product concept to certified volume production has never been easier.
National Instruments
Booth 2229
The National Instruments LabVIEW FPGA Module uses LabVIEW Embedded technology to extend LabVIEW graphical development to target FPGAs on NI reconfigurable I/O (RIO) hardware. NI LabVIEW is uniquely suited for FPGA programming because of its ability to clearly represent parallelism and dataflow. With the LabVIEW FPGA Module, you can create custom measurement and control hardware without low-level hardware description languages or board-level design. You can use this custom hardware for unique timing and triggering routines, ultrahigh-speed control, interfacing to digital protocols, digital signal processing (DSP), and many other applications requiring high-speed hardware reliability and tight determinism.
National Manufacturing Company, Inc.
Booth 1850
As specialists in deep drawn enclosures, National Manufacturing Company has been producing precision deep drawn metal components for its global customer base in medical, electronic, battery, military, aerospace, satellite industries for over half a century. A dedicated medical manufacturing facility of its own serves the unique requirements of the medical community. National can deep draw custom enclosures to your specifications in every drawable material, including ferrous and nonferrous, titanium, hasteloy, nickel, kovar, inconel, mumetal, monel, and tantalum. National designs and builds its own high-grade tooling to ensure precision tolerances and consistent part quality. National will incorporate their existing tooling library to meet your project needs and produce economically high quality enclosures.
Nidec-Shimpo America Corp.
Booth 1438
Shimpo Instruments –announces the “E-FORCE ” FGS-200PV programmable Force Test System with USB communications
“E-FORCE” provides a fast, accurate and affordable method to retrieve and maintain Compression and Tension testing and break force test data. Insertion-withdrawal, break, and peak force, and multiple peaks.
FREE software, preloaded programs, five operating modes “E-FORCE” provides a wide range of test configurations. PC or test stand control alows Force vs. Displacement and Force vs. Time
•Top Load Testing for medical containers, syringes, pistons, etc…
•Tensile and Compression Break graphically
•Tensile and/or Compression Peaks displayed graphically with data.
See a demonstration of the “E-FORCE” at booth #1438,(Nidec-Shimpo America) at the MDM 2007 Mid West at the Minneapolis Convention Center.
Proquis Inc.
Booth 2326
Proquis, Inc. We provide the most comprehensive set of quality management software tools available today. Module specific means you can choose from document control, audits, corrective actions, rapid process mapping, simulation and analysis to CRM. LAN version or enterprise version available depending on the size and number of facilities you link together. All the main international standards supported including (21 CFR, Part 11). We've helped customers like, Unisys, Airbus, US Department of Energy, Home Diagnostics, Carondlet Health Network and various VA Hospitals to deliver better products and services and meet their strict compliance criteria.
QuadTech Inc.
Booth 1434
QuadTech Implantable Lead Test Systems provide an automated solution for performing Multipoint Hipot, Insulation Resistance, Isolation Testing, as well as point-to-point 2 Wire and 4 Wire Low Resistance Testing. The complete solution provides an efficient, reliable, and reproducible test system, ensuring product compliance and quality while providing traceable test data.
QuadTech’s Sentinel System is a fully automated Electrical Safety Test solution designed specifically for Medical Device Manufacturers (MDM). It allows MDMs to collaborate on a global level, keep production costs down, collect data electronically, improve compliance with global regulatory requirements like IEC60601-1, and improve the overall efficiency of manufacturing processes.
Swiss Tec, LLC
Web: http://www.swisstecag.com
Booth 2105
MD&M premiere: The Swiss Tec Micro-T15 is a high-output, laser-based micro-machining system for cutting tubes dia (OD) 0.8-25.0 mm (e.g. stents, biopsy needles, catheters); the fastest and most accurate in it's class. Contour fidelity 1-4 microns, top cutting speed 2000 mm/min., kerf width 10 microns. Many options, e.g. automatic precision feeder, robotic handling of work pieces, LAN ability, automatic repositioning of cutting head, etc.
Tekscan Inc.
Booth 1454
Tekscan, Inc. is the leading manufacturer of complete force and pressure measurement solutions. Accurate, simple to use, and extremely cost-effective, Tekscan's sensors and systems are used in an ever-expanding array of applications in industry, medicine and dentistry. The I-Scan® System is a versatile, complete pressure measurement kit, utilizing Tekscan's patented, thin-film, matrix-based array sensors. The FlexiForce® division provides economical force measurement solutions to OEM and consumer markets. Our newly released Wireless ELFTM provides immediate access to load measurement data while eliminating cumbersome wires and enabling your computer to quickly capture and store that data from up to 50 feet away.
Vision Engineering Inc.
Booth 1344
Merlin is 2-axis, low cost video measurement system, ideal for wide spectrum of measurement tasks; designed for easy, accurate measurement of component parts in both X/Y axis. Merlin has 150mm x 100mm (6” x 4”) XY stage with 0.001mm resolution scales. The stage provides robust, yet mechanically smooth operation, with capabilities of measuring diverse range of components accurately.
The Merlin 300 utilizes high performance camera, combined with QC-300,enables operator to determine component edge for consistent repeatability/accuracy. Also, QC-300 is equipped with capabilities for automated point data capture with full PC connectivity. Completing the Merlin is 8mm charged-coupled device CCD camera with composite video output built into the system.
Nothing contained on this Web site shall be construed as a contract, joint
venture or other relationship between CANON COMMUNICATIONS LLC and any
exhibitor, attendee, or other person or entity, or create an express or
implied obligation that may be reasonably relied upon or result in liability
against CANON COMMUNICATIONS LLC.
