Amara Ohrmann Ltd.

Booth 3049

Amara Ohrmann Ltd. presents the TYPE 10, a reliable internal o-ring assembly system in manual, bench-top, automatic station or stand-alone machine formats. The TYPE 10 assembles seals in less than a second, after part presentation, eliminates operator fatigue and provides increased productivity. The device can be tooled to assemble common seals to multiple depths and as a bench-top system it will triple hand assembly rates. Whatever level of automation you choose, the TYPE 10 assembly system will assure that seals are properly installed without any additional tooling or time consuming secondary operations.

Amara Ohrmann Ltd.

Booth 3049

Amara Ohrmann presents low pressure injection molding, also referred to as hot melt molding. This system replaces traditional time consuming potting and encapsulation methods and provides superior protection from shock and moisture. Whether customer's requirement call for the protection of PCB’s or overmolding to produce cable assemblies with strain relief, the company patented system will ensure that all air is evacuated leaving no voids providing consistent dimensional repeatability. The company's design department will work with clients to select the proper material and design a system suited to one's particular needs.

Apex Dynamics USA

Booth 3509

Apex Dynamics' food grade gearbox has over 7000 sizes and ratio combinations. It can be epoxy coated which meets and exceeds FDA specifications. The company products are 100% stainless steel options available, 5 year warranty, 2 week delivery. Apex express is 24 hour delivery.

Bosch Rexroth Corp.

Booth 2805

Rexroth's new eLINE Compact Modules incorporate two eLINE Ball Rail guideways, combining the weight advantages of aluminum with the toughness of the hardened steel inserts and guaranteeing smooth motion. These modules are available as the eCKK ball screw driven version and the eCKR belt driven version, in profile sizes of 90 and 110mm. An available stepper motor with integrated positioning control makes the eLINE Modules easy to program and start up. eLINE Compact Modules are pre-lubricated at the factory and can operate for up to 10,000km without relubrication.

Bosch Rexroth Corp.

Booth 2805

The new series of Electromechanical (EMC) Cylinders from Bosch Rexroth provides high thrust, high speed capabilities with greater flexibility and control to applications traditionally using hydraulic or pneumatic cylinders. The EMC cylinders’ combination of power, speed and corrosion-resistant construction, makes them ideally-suited to applications in packaging and material handling, assembly and robotics, wood manufacturing, metal forming, plastics, paper converting and web handling. EMC cylinders are energy efficient and environmentally friendly, with versatile configuration options. The cylinders are available in six sizes ranging from 32 to 100, with stroke lengths of up to 2,000mm, and speed capabilities of up to 1.6m/sec.

Bosch Rexroth Corp.

Booth 2805

For applications requiring a more polished appearance, Rexroth now offers a DesignLine version of its standard aluminum framing connectors. Die-cast aluminum cube connectors, T connectors and end connectors, as well as 45° connectors, swivel arm joints, swivel bearings and gussets now come with a silver ESD coating. The high-quality appearance that matches the aluminum profiles makes Rexroth’s aluminum framing system ideal for designer furniture, architectural applications, trade show and museum displays, as well as sales showrooms. The set includes plastic caps to cover holes in smooth-sided profiles, preserving the system’s appearance while preventing the accumulation of dust and other contaminants.

Comark Corp.

Booth 3243

Comark Corporation’s PanelMagic PC (PMPC) is a rugged, compact, cost-effective computer that integrates high-resolution displays with high performance computing. Built with stainless steel, and gasketed bezels, the front panel meets IP66 and NEMA 4X ratings. The PMPC is available with options such as Core 2 Duo processing, PCI expansion slot, up to 1GB RAM, resistive touch screen, compact flash and/or hard drive, and stainless steel bezel with brushed finish or black textured epoxy powder coat. The system is available with a 15”, 17”, 19”, or 20” LCD.

DENSO Robotics

Booth 3119

DENSO offers a wide range of high-speed, four-, five- and six-axis robots, for payloads up to 20 kg and reaches from 350 to 1,300 mm. Repeatability is to within ±0.015 mm. DENSO’s compact, space-saving design facilitates integration, while a high maximum moment of inertia allows a wide variety of end effectors and applications. Standard, dust- and mistproof and cleanroom models are available. Easy-to-use programming software, controllers and teaching pendants are also offered. ANSI and CE compliance enables global deployment. UL-listed models are available for both the U.S. and Canada.

Fishman Corp.

Booth 3431

Fishman's AirFree™ LDS9000 workstations provide 25% more repeatability than the latest pneumatic systems. These revolutionary AirFree™ systems are fully programmable, feature a digital display of all settings, do not require unreliable air pressure and much more. Dispense virtually any assembly fluid from watery-thin CA to solder paste. Available in both hand held bench-top models or integration kits for automated applications.

FlexLink Systems Inc.

Booth 3201

The X85 conveyor platform sets new performance standards to what a conveyor system can do when it comes to capacity, speed and load. Line flexibility is enhanced by new standard functions and substantial concern has been given to trouble free operation and good factory environment. The X85 conveyor offers longest in class MTBF (Mean Time Between Failures) and lowest in class noise level. Preconfigured conveyor recipes and engineering tools makes engineering fast, accurate and easy. The conveyor platform is subject to several registered designs and patents.

FLIR Systems

Booth 3223

FLIR’s new P660 infrared camera makes it easy to spot emissivity and object temperature differences, which is essential for critical predictive maintenance surveys in industrial, manufacturing, and utility environments. The FLIR P660 features a new 640 X 480 infrared detector that delivers high definition output, as well as optimum <45 mK thermal sensitivity to help users capture the finest image detail and temperature difference information. The P660 also includes an embedded Geographic Positioning System (GPS), remote control, greater image enhancement, and accuracy features to help one productively scan for conditions that signal trouble.

FLIR Systems

Booth 3223

FLIR’s new T200 boasts many of the features found in higher-model FLIR T-Series infrared cameras. The T200’s bright 3.5-inch display makes it easy to see temperature differences and radiation emitted from objects—conditions that signal energy waste, building envelope troubles, even electrical system and component failures. Also features picture-in-picture fusion which provides a scalable thermal picture inside a visible-light picture, flexible and interchangeable optics to help users get the proper angle on their work, Microsoft Word compatibility, and high quality 200x100 IR resolution.

FRABA, Inc.

Booth 3351

INTACTON, a subsidiary of the FRABA group, has developed an optical sensor system which can replace contact-based measuring systems in many areas, e.g. in measuring wheel applications. The cost-efficient OPTIPACT system is the first motion sensor for industrial applications which offers synchronous measurement of two orthogonal axes. Because the measuring process is based on an optical correlation method, no external reference pattern is needed. Errors caused by slip and accumulated dust or dirt is thereby avoided. OPTIPACT enables direct, reliable measurement of relative movements and speed, ensuring smooth operation and improved accuracy.

FRABA, Inc.

Booth 3351

POSITAL, manufacturer of OPTOCODE series of optical absolute rotary encoders is proud to exhibit the MAGNETOCODE (MCD). The MCD, also an absolute rotary encoder, uses a magnetic measuring principle. It is low in cost and compact in size. There is no need for internal / external battery back-up and various mounting options are available. The gap between cheap potentiometers and high end optical encoders is finally directly bridged by the MCD.

igus Inc.

Booth 3150

The bearings and linear guides specialist will be promoting its maintenance-free slide tables, as well as its full suite of self-lubricating polymer plain bearings and linear guides. DryLin® slide tables incorporate lubrication-free iglide® plastic liners, which makes them completely maintenance-free. These liners also confer a very low coefficient of friction, wear-and corrosion-resistance to the linear units, which can last in applications where expensive ball screw systems fail due to ingress of dirt.

IPdisplays

Booth 3519

IP-LCD. This new digital signage player provides the ability to display real-time information about productivity, safety messages, and more, on LCDs and plasma displays -- with customizable, user-configured layouts. The Digital Signage Players are compact (about the size of a DSL modem) and easily can be mounted to the back of any LCD, plasma TV, or monitor. They are available immediately and cost $1,225.The Digital Signage Players, as well as our smart LED displays, are a cost efficient, server-free solution that’s rapidly and easily deployed.”

Kahle Automation

Lin Engineering

Booth 3437

Lin Engineering's SilverPak 23CE is capable of up to 3 Amps Peak of output current, operates from +12 to 40 VDC, and can reach speeds of 16.7MHz. Some of the fully programmable features include: stand alone operation with no connection to a PC; fully programmable ramps and speeds; software selectable hold and move currents; up to 256x microstepping resolution settings; and four user configurable digital I/O’s. The built-in encoder allows for instant encoder feedback and is available with a CPR of up to 1250.

Misumi USA Inc.

Booth 3401

Misumi USA, Inc. expanded its single-axis actuator line with the LX Series in standard or covered styles in three capacities, with lower overall stage height to conserve space, dowel holes in the base plate for accurate and fast assembly, plus a base length configurable down to 10mm increments. As with all Misumi products, there is no minimum quantity and configured units can be supplied in as little as six days. Unit prices start at $460, are RoHS compliant, available in 100-600mm lengths, with one or two blocks standard and 1, 2, 5 or 10mm leads.

noax Technologies Corp.

Booth 3348

noax indstrial touch panel computers meet the machine control requirements of high CPU power, free slots and a long lifecycle and reliability because machine downtimes cause enormous immediate costs. This is where noax PCs prove their worth controlling machines in 24-hour continuous operation, withstanding dust, wetness, vibration, and shock. noax PCs are equipped exclusively with industrial-grade components and proprietay noax all-in-one motherboards. The result is long-term availability of all primary components of at least 5 years. Another important aspect is that the panel PCs comply with NEMA 4X protection classification, due to their completely sealed design with rugged aluminum or stainless steel enclosures.

RNA Automated Systems Inc.

VarTech Systems Inc.

Booth 2813

VarTech's VTPC150VS is a VESA mount, fully-enclosed, NEMA 4X, IP66 industrial computer with integrated LCD. This model is ideally suited for use throughout pharmaceutical facilities, food processing areas, beverage bottling lines, petrochemical plants and many other harsh condition environments where airborne moisture and/or dust exist or even in direct high-pressure wash-down areas. The VTPC150VS LCD computer system is equipped with the latest computer technology including Intel’s Pentium Core Duo processor. The VTPC150VS is exclusively manufactured and supported by VarTech Systems.

Yamaha Robotics

Booth 3113

Yamaha Robotics 220mm arm length SCARA robot is ideal for small part assembly processes. Its small footprint allows for multiple robot installations on production lines utilizing conveyors or rotary index tables. This YK220X SCARA robot has an industry leading 1 KG payload and repeatability of +/- .01mm.

Nothing contained on this Web site shall be construed as a contract, joint venture or other relationship between CANON COMMUNICATIONS LLC and any exhibitor, attendee, or other person or entity, or create an express or implied obligation that may be reasonably relied upon or result in liability against CANON COMMUNICATIONS LLC.